Mast Parts

BB PSP-100, PVC sill plate cover used to finish and protect conduit or cable penetrations at exterior walls, providing a clean surface transition around the raceway opening.

BB PSH12-30, porcelain wire holder with clamp strap for mounting to structure. Supports and clamps open conductors or drop wires, keeping them isolated from building surfaces.

BB CCMH-20, 2 Inch clamp-type service entrance cap for mast installations. Clamp screws support drop conductors and the body shields the mast opening from moisture and abrasion.

BB PMHS-200, large PVC service entrance head with wide opening for mast or raceway. Protects conductors as they emerge from the raceway and sheds moisture away from cable and mast.

5/8 inch x 8 foot copper-clad steel ground rod used as a grounding electrode for residential or commercial electrical services, providing low-resistance earth connection for NEC-compliant grounding and lightning protection systems.

BB WPSEN-20-4/0, zinc connector for 2 Inch SE cable or conduit termination through a knockout. Compresses jacket and bonds cable or raceway to the enclosure with included locknut; suitable for 4/0 and similar large SE cable.

BB WPSEN-12, zinc connector for 1-1/4 Inch service entrance cable or conduit. Terminates through a knockout and provides jacket compression and bonding with included locknut.

BB 2SR, dual-rated Cu/Al two-port mechanical splicer-reducer for #2–#14 AWG conductors, pre-filled with oxide inhibitor. Used for inline splicing or reducing conductor sizes in power circuits without soldering.

BB CCMH-25, 2-1/2 Inch clamp-type service entrance cap for mast installations. Accommodates service conductors and shields the mast opening from moisture and abrasion.

BB CCMH-30, 3 Inch clamp-type service entrance cap for mast installations. Clamp screws support drop conductors and the body shields the large mast opening from weather.