Screws - Bolts - Nuts - Lags

M-TAL JW113 1/4 in fender washer with 1 in OD, zinc-plated steel, used where a larger bearing surface is needed under bolt heads, nuts, or screw heads.

M-TAL JC12C zinc-plated No. 12 jack chain for suspending light fixtures, signage, and cord drops; open-link design allows easy cutting and attachment with S-hooks or eyelets.

King 06024 general-purpose insulated cable staples supplied in a 2,500-piece bucket, ideal for large electrical projects where NM-ROMEX and control cables must be neatly secured to framing members. ROMEX

M-TAL JN163 1/4-20 UNC zinc-plated hex finish nut for use with 1/4 in machine screws and threaded rod in electrical supports, brackets, and general hardware assemblies.

M-TAL JRM88 8-32 × 1-1/2 in round-head machine screw, zinc-plated, for fastening boxes, straps, and hardware into tapped 8-32 holes or with matching machine nuts.

M-TAL JRM89 8-32 × 2 in round-head machine screw, zinc-plated, for deep-box device mounting and hardware assemblies requiring long 8-32 fasteners.

M-TAL J1554 1/4 in x 4 in machine-screw toggle bolt, mushroom head, for heavy-duty anchoring in hollow walls and ceilings where access is only from one side.

M-TAL JTEKD6 #10 × 3/4 in hex washer head TEK screw, self-drilling, zinc-plated for quick fastening of thin sheet metal or accessories to steel framing.

M-TAL CSH10F 1/4 in x 1-1/4 in Phillips pan-head screw, zinc-plated, for general hardware fastening into pre-drilled metal or wood with appropriate anchors or nuts.

M-TAL JRM86 8-32 × 1 in round-head machine screw, zinc-plated, for device mounting, cover plates, and hardware where standard 8-32 length is required.